J-TPVD0100DLT Jobe Topaz Differential Valve 1" Inlet With Detach Long Tail

Description

Listing is for a
J-TPVD0100DLT Jobe Topaz Differential Valve 1" Inlet With Detach Long Tail (J-TPVD1DLT).
Description
Topaz Differential valves are ideal for use in water tanks which are filled by a pressure system-controlled water pump. The valve gives a level difference which is adjustable from 50mm up to 2.5m to minimize starting and stopping of the pumping system.
Applications
Maintaining Water Levels in:
•
Water Storage Tanks
•
Water Cisterns
•
Irrigation Applications
Principle of Operation
•
The valve mounts at the top of the tank. It fits easily through a thin-walled tank or screws into a threaded tank inlet.
•
As the tank empties the weighted float travels down the cord until it hits the bottom stop. The valve then opens immediately to give a full flow.
•
The valve now runs constantly, and the weighted float rises until it hits the upper float stop. This lifts the arm and the valve shuts down.
•
Observe the pressure that your pump runs at while the tank is filling. Set the pressure switch to turn the pump off
at a pressure at least one bar above the running pressure.
Features
•
High flow
•
Start and stop levels can be easily adjusted to give water level differentials
from 50mm to 2.5 m
•
Keeps pump operation to a minimum.
•
Detach™ Valve Seal Access System for quick access to valve seal (Patented)
•
Ideal for all makes and models of tanks.
Warranty information:
Jobe valves will replace or repair product that fails due to faulty parts or manufacturing for 2 years from dated proof of purchase.  Jobe Valves does not accept any liability whatsoever for any consequential damage caused, or associated costs involved, in the malfunction or in the replacing or repairing of any Jobe product.
Shipping information:
These products are shipped Using UPS ground or USPS Priority.  We will use whichever is priced better at the time of purchase.